Save time and energy when replacing flat or punctured tyres with the B-G Racing Tyre Changing Ramp.
Designed for use on twin axle trailers, the Tyre Changing Ramp simplifies the wheel changing process. Simply loosen the wheel nuts/bolts on the damaged wheel and drive the good wheel onto the Tyre Changing Ramp. The damaged wheel is then suspended off the ground allowing for work to be carried out safely and efficiently, before driving the trailer back off the ramp and re-tightening the nuts/bolts.
No more messing around with jacks or makeshift shims, just throw one of these B-G Racing Tyre Changing Ramps in the back of the trailer.
(H1) 140mm - 5.51"
(H2) 180mm - 7.09"
(W1) 205mm - 8.07"
(W2) 215mm - 8.47"
610mm - 24.02"
3.1kg - 6.83lb
3.6kg - 7.94lb
(W.L.L) 7000kg - 15432lb per ramp
This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.
This guarantee does not affect your statutory rights.