B-G Racing is the UK and European sole distributor for the premium US motorsports equipment brand, HUBStands.
This advanced and proven equipment enables complete suspension and alignment set-up, ride heights, camber and toe angles at the hub without the wheels and tyres attached.
With HUBStands, set-up is far quicker and more precise than using tyres, with accuracy being measured to within 0.01 degree. The equipment also eliminates the need to constantly roll the car on and off the scales, greatly reducing the set-up time.
HUBStands Proline are height adjustable with a 15cm x 30cm (5.9” x 11.8”) low resistance, high load roller bearing wheeled base. Every set of HUBStands comes with one type of multi pattern hub plate that fits more than one bolt pattern per set. The interchangeable plates are available in a wide range of configurations and combinations to fit most makes, the majority of 4 & 5 bolt patterns, and also a small selection of hubs with centre locking nuts.
Each set also includes four unique Toe Sticks, precisely machined to fit perfectly parallel to the hub face at the top of the plates for "stringing" or at the bottom of the HUBStands for measuring total toe, and a set of stainless steel safety plates to prevent the HUBStand from rolling off the scale.
HUBStands are manufactured in theUSA, machined to the highest quality from 6061 T6 aluminium, and are suitable for cars up to a weight of 1700kg (3740lbs).
If you are not sure which application you need for your vehicle, please contact us via phone or email and we will be happy to discuss the options available.
The kit comprises of 4 machined aluminium HUBStands and a set of your choice of interchangeable, multiple bolt pattern hub plates, 4 toe sticks and 4 safety plates. Utilises low resistance, high load roller bearing wheeled bases that maintain 0.1mm height and 0.01 degree camber tolerance.
Additional Hub Plates
Allows one set of HUBStand bases to be used on more vehicles. Consists of 4 plates
Toe Stubs Extensions
attach to hub plates to space the toe sticks off the face of the hub to clear large calipers and grease caps. Consists of 4 pairs with fixing screws.
Centre Nut Collars
For GT type cars with single centre nut hubs. Consists of 4 collars, available for:
BGR-HS8010 - FERRARI 458 and GT3/CHALLENGE
BGR-HS8011 - FERRARI 430 and CHALLENGE
BGR-HS8012 - RADICAL SR3/8
BGR-HS8013 - BRITISH TOURING CAR
BGR-HS8019 - AUDI R8 GT3
BGR-HS8020 - PORSCHE 964, 993, 996 and 997
BGR-HS8021 - PORSCHE 991 CUP
BGR-HS8024 - GROUP 4 HUBS
|Weight||28kg - 61.6lbs|
|Loading Capacity||1700kg - 3740lbs|
Delivery & Returns
Free UK Mainland Shipping Available on this product. Please note that exclusions apply.
For information regarding delivery and returns, please visit our Delivery & Returns page in the footer of our website.
This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.
This guarantee does not affect your statutory rights.
Q. What is included in a complete set of HUBStands Proline?
A. One complete set of HUBStands Proline includes 4 HUBStand Proline bases and Hub Plates with the PCD combination of your choice, 4 Toe Sticks to measure your vehicles tracking and 4 Stainless Steel Safety Plates to prevent your vehicle from rolling off the scale.
Q. Which Hub Plate Pattern will I receive?
A. You will receive the pattern as requested when you order. You will find all the applications currently available listed at the bottom of the HUBStand web page. If you are unsure of your vehicles PCD pattern, please contact us and we will be happy to help.
Q. Is it possible to use HUBStands with my Porsche Carrera Cup car that has centre locking nuts?
A. Yes. We have available Centre Locking Nut Collars for all Porsche Cup cars and a wide selection of other race cars.
Q. The PCD pattern on my vehicle is not listed in the applications. Is it possible to get a customised plate pattern?
A. Yes. Please contact us via phone or email for more information.
Q. Will HUBStands Proline fit on my scale pads?
A. Yes. HUBStands Proline have a 15cm x 30cm fixed base that will easily fit on the B-G Racing scales or most other brands of scales which have a pad size of 38cm x 38cm (15" x 15"). The HUBStands Proline can also be used on smaller scale pads as long as they are centered on the pad.
Q. What are the Toe Stub Extension plates?
A. The Toe Stub Extension plates are designed to elevate the Toe Sticks off the face of the hub by either 6.5cm or 10.5cm to clear larger brake calipers and grease caps.
Q. How tall are the HUBStands?
A. The HUBStands are individually height adjustable and are designed to give you additional working space under the car. At their lowest setting, the hub centre line is 343mm off the ground and at the highest point, the hub centre line is 411mm off the ground.
Q. Can I use HUBStands in conjunction with the B-G String Lines (BGR200)?
A. Yes. This will allow you to carry out a complete set up on your vehicle and ensure your front and rear axles are running parallel.
Q. Is there a Hub Plate Pattern that will fit both 4-stud and 5-stud vehicles?
A. No. We recommend you purchase a complete set of HUBStands to suit one of your fitments, and then an additional set of plates to suit your other fitment.
We recommend that all customers contact us prior to purchasing from the HUBstands Proline range.
Although we have specific fitments we like to know that the exact kit has been purchased for your needs.
There are various ways in which a kit can be made up, with optional extra parts that can assist when using the HUBstands Proline kits.
Please contact us and one of our experienced technical team will be able to inform you of the perfect set up for you.
Call us: +44(0)1268 764411 - or drop us an email: firstname.lastname@example.org